Report Overview

Development of housing units and high-rise buildings, government initiatives, and entry of both international and local plastic pipe producers may provide growth opportunities for Indonesia Plastic Pipes and Fittings Market during the forecast period between 2023 and 2029.

Indonesia Plastic Pipes and Fittings Market- Industry Trends & Forecast Report, 2029

Indonesia plastic pipes and fittings market size is projected to grow at a CAGR of 6.7% during the forecast period. Major factors driving the growth of the market include rapid urbanization and government investments in infrastructure, which necessitates the use of pipes for water distribution systems. Large-scale interregional oil and gas projects have fueled demand for high-performance corrosion-resistant plastic pipes. Adoption by various industries such as Chemicals & Petrochemicals, Mining, and others will help the market grow significantly during the forecast period.

Indonesia Plastic Pipes & Fittings Market - Overview

A plastic pipe is a plastic tubular section or hollow cylinder. It has a circular cross-section and is primarily used to transport substances that can flow, such as liquids and gases (fluids), slurries, powders, and masses of small solids. Plastic pipes are typically used for the local transportation of liquids and gases. Plastic pipes and shapes are made from raw materials such as polyvinyl chloride (PVC), polypropylene (PP), and polyethylene (PE).

Growth Drivers

Raising Awareness of the Advantages of Plastic Pipes

The market for plastic pipes and forms is expected to gain from growing knowledge of the benefits of plastic pipes and fittings over alternatives. In comparison to conventionally used metal pipes, plastic pipes and fittings are more lightweight, less expensive, and rust and corrosion-free. Also, the insulating qualities of plastic pipes reduce heat loss in hot water pipes and stop condensation from accumulating on cold water pipes. Fast installation timeframes and lengthy service life are two further advantages of plastic pipes. The market will likely be driven forward by these reasons, which are expected to increase demand for plastic pipes and forms.

Restraints

Environmental Concerns

Growing environmental concerns over polyvinyl chloride (PVC) pipes are anticipated to impede industry expansion. Hazardous environmental pollutants are produced during the production and disposal of plastic pipes, such as polyvinyl chloride pipes. PVC causes human cancer. Phthalates are commonly found in PVC pipes. According to research on animals, even low amounts of continual phthalate exposure are harmful. While still producing high-quality plastics that raise production costs and thus constrain market expansion, manufacturers of plastic pipes are progressively taking steps to lessen the environmental and health risks.

Impact of COVID-19 on Indonesia Plastic Pipes & Fittings Market

COVID-19 impacted the polymer market, which is expected to see a price decrease due to a balanced-to-long supply. A poor quarterly performance in prior years and near-term demand worries surrounding the emergence of the new coronavirus's Omicron strain could put pressure on the stocks of listed plastic pipe makers. Prices for polyvinyl chloride (PVC) resins, an important component of plastic pipes, have been falling, which could be harmful over time. With the logistics and lockdown simplified, it is expected that PVC demand will return to pre-COVID-19 levels. Also, the use of PVC in medical equipment and instruments during COVID-19 is expected to expand PVC's market.

Indonesia Plastic Pipes & Fittings Market

Segmental Coverage

Indonesia Plastic Pipes and Fittings Market - By Type of Pipe

Indonesia plastic pipes and fittings market is segmented into PVC, PE, ABS, PVDF, and PPR. The PVC pipe segment dominates the market share. This is because PVC pipes are the most used plastic pipes. After all, they are light, durable, strong, and corrosion resistant. The construction of large government projects, such as Mass Rapid Transit and Flyover Roads, has increased the demand for PVC pipes in the country. PE pipes necessitate more technical knowledge and are not produced by all companies.

Indonesia Plastic Pipes and Fittings Market - By Type of PVC Pipe

Based on type of PVC pipe, the Indonesia plastic pipes and fittings market is divided into UnPlasticized PVC Pipes (uPVC), CPVC, and PVC-O segments. The most widely used PVC pipes are unplasticized PVC (uPVC) pipes because they are simple to install and offer the highest flow rates for liquid transportation. CPVC pipes have a modest market share and offer great temperature thresholds and chemical resistance. PVC-O pipes are relatively new goods, however, they have some benefits over other PVC varieties, including higher energy efficiency and less material usage.

Indonesia Plastic Pipes and Fittings Market - By Structure of PVC Pipe & Fittings

Based on structure of PVC pipe & fittings, Indonesia plastic pipes and fittings market is divided into Organized and Unorganized segments. The market is mostly well-organized. PT Wahana Duta Jaya Rucika, Vinilon Group, Unilon, and PT Langgeng Makmur Industri Tbk are some of the leading manufacturers in the organized sector. Indonesia has a higher share of imports, with the majority coming from China and Japan. Japan and the Republic of Korea are the country's main export destinations.

Indonesia Plastic Pipes and Fittings Market - By Structure of PE Pipe

Based on structure of PE pipe, Indonesia plastic pipes and fittings market is divided into HDPE, MDPE, and LDPE segments. The most generally used PE pipes are HDPE pipes, which are utilized in both water supply and sewage lines. Compared to HDPE pipes, MDPE pipes are more stable at room temperature and have a stronger resistance to stress cracking. Because of its electrical characteristics and robust resistance to various contaminants, LDPE is the pipe that is used in electrical insulation the most frequently.

Indonesia Plastic Pipes and Fittings Market- By End Use

Based on end use, Indonesia plastic pipes and fittings market is divided into Water & Irrigation, Sewage, Industries & Mining, Cable Protection Conduits, and other segments. In Indonesia, irrigation and water supply are the two main applications for plastic pipes and fittings. PVC and PE kinds are frequently used for irrigation and water delivery. The need for adaptation in sewerage and drainage systems has increased because of a growing population and public awareness of sanitation and hygiene.

Competitive Landscape

Indonesia plastic pipes and fittings market is fiercely competitive, with GF Piping Systems Ltd., Maspion Kencana, Pralon, PT Bangun Indopralon Sukses, PT Indopipe, PT Langgeng Makmur Industri Tbk., PT Wahana Duta Jaya Rucika, Unilon, and Vinilon Group. The key strategies used by these market leaders are new product launches, mergers & acquisitions, and alliances. To grow their market share, these companies are also focusing on investing in innovations, collaborations, and expansions.

Scope of the Report

By Type of Pipe

• PVC

• PE

• ABS

• PVDF

• PPR

By Type of PVC Pipe

• UnPlasticized PVC Pipes (uPVC)

• CPVC

• PVC-O

By Structure of PVC Pipes & Fittings

• Organized

• Unorganized

By Type of PE Pipe

• HDPE

• MDPE

• LDPE

By End User

• Water & Irrigation

• Sewage

• Industries & mining

• Cable Protection Conduits

• Others